Kenwood KAC-PS702EX 2-Channel Amplifier

Kenwood KAC-PS702EX Description

Performance Series, Designed to be One of the Best Sounding Amplifiers

They provide outstanding dynamics, holding the musical reproduction to the highest standard whether delivering impactful bass or the most detailed notes. KAC-PS702EX amplifier to your system, and you’ll hear all the tonal color, impact, and detail you’ve been missing, from the punch of the rhythm section to the shiver induced by your favorite singer’s voice.

Versatile Power
The compact KAC-PS702EX 2-channel amp delivers 70 watts RMS per channel to your full-range speakers. This amp will bring new life to factory speakers, but you’ll really notice the difference when you pair it up with new aftermarket speakers or components, or bridge it out at 4 ohms to push 170rms x 1 to a subwoofer.

Features:
* Performance Standard Series
* Stereo or mono setup
* 500W Maximum output power
* Built-in Low-pass filter
* Signal Sensing Turn-on
* Speaker level input
* Power MOS-FET switching power supply
* Die cast aluminium heat sink

Specifications:
* Amplifier Type: Class AB
* Operating Voltage: 14.4V ( 11.0 – 16.0 V allowable)
* Current Consumption: 15 [A]
* Max Power: 500W
* Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V)
* Frequency Response: 20Hz-50k Hz (+0dB, -3dB)
* Input Impedance: 10k ohm
* Speaker Impedance (Bridged connection): 4 ? ( 2 ? to 8 ? allowable)
* Speaker Impedance (Bridged connection): 4 ? to 8 ? allowable
* Dimensions(WxHxD): 230 x 56 x 167 mm
* Weight: 1.4 kg

CEA-2006 Primary Ratings
* Power Output: 70 Watts RMS x 2 at 4 Ohms and ?1%THD+N
* Signal-to-Noise Ratio: 80dBA (Reference: 1Watt into 4Ohms)

Rated Power at 14.4V
* 70Watts RMS x [ch] (4 Ohms, 20-20k Hz, ?1.00 % THD)
* 85 Watts RMS x [ch] (2 Ohms, 1kHz, ?1.00 % THD)
* 170 Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ?1.00 % THD)

Audio Section
* Low-Pass Filter: Built in Low-Pass Filter (80Hz, -18 dB/oct)
* RCA Input Sensitivity: 0.2[V] – 5.0 [V]
* Speaker Level Input Sensitivity: 4.0[V] – 12.0 [V]

Terminals:
* Battery & Ground Screw Type: Terminal Block (Nickel colored) (M4)
* Speaker Output: Screw Type Terminal Block (Nickel colored) (M4)
* Line In: RCA (Nickel colored)
* Speaker Input: Connector (Balance)